SMF CNC Machining Equipment
Monarch VMC-150: GE 1050
- Control 30" by 74" travel table
- #5000 load capacity
- 0 to 32.5 vertical working distance
- 4-axis capabilities
- 40 position tool changer
Mori-Seiki MH-40: Fanuc Control
- X-axis travel 21.7"
- Y-axis travel 17.7"
- Z-axis travel 19.7"
- Table size 17.7" by 17.7"
- #880 load capacity
- 32 position tool changer
Mori-Seiki MV-45: YAS-NAC
- Control table travel 17.7" by 30"
- Spindle travel 19.68"
- #1540 load capacity
- 20 position tool changer
Mori-Seiki SL35B
- Turning center 12" OD chuck
- 3.5" OD bar capacity
- 10 position tool changer
- Maximum turning 54" by 16" OD
- Programmable tailstock
- Mori-Yasnac control
Ikegai TU30 Fanuc Control
- Turning Center 15" O.D. Chuck
- 3.5 O.D. Bar Capacity
- Max Turning 40" x 16.75" O.D.
- 8" x 23.62" Tail Stock
- 12 Position Tool Changer
Toshiba VMC 8
- X-Axis travel 60"
- Y-Axis travel 30"
- Z-Axis travel 34"
- Table Size 80" x 35"
- 40 Position Tool Changer
Fadal 5020 VMC
- X-Axis travel 50"
- Y-Axis travel 20"
- Z-Axis travel 18"
- Table Size 52" x 20"
- 20 Position Tool Changer
- Spindle Speed 10,000RPM
Cincinnati Arrow 750 VMC
- X-Axis travel 30"
- Y-Axis travel 20"
- Z-Axis travel 20"
- Table Size 24" x 42"
- 21 Position Tool changer
- Spindle Speed 6000RPM
Cincinnati Hawk 150 w/ SMW 200 Bar Feeder
- Turning Center 7" O.D. Chuck
- 2" O.D. Bar Capacity
- Max Turing 16" x 6" O.D.
- 12 Position Tool changer
Gray Vertical Turret Lathe
- Table size 48" diameter
- Faunc Controls
CNC Software
EZ Cam
- Mill, Turn, EDM Programming
- DXF and IGES Format Conversion
- Direct download/upload to each machine.
Surf Cam
- 2 & 3 Axis Mill, Turn, EDM
- DXF, IGES & Parrasolid
- Direct download/upload to each machine
Solid Works
- 3D Design
- Download to Surf Cam to start machining
Predator DNC
- Remote direct download to each machine
- Remote direct upload to server
Fabrication Equipment
Saws
- Do-All 15" Vertical
- Do-All 20" Vertical
- Powermatic 20" Vertical
- HEM H105A 14" Round - 16" Flat
- HEM V100LM-Z 18" Horiz - 20" Vert
- Do-All 14" Horizontal
- Bemo Cold Saw
- Roll-In Saw
- Everett Abrasive Saw
Rolls
- 30" x 14 Gauge (Hand)
- 48" x 14 Gauge (Hand)
- 4' x 10 Gauge Power Roll
- 8' x ½" Power Roll
- 3" x 3 5/16" Angle Roll
Iron Workers
- Hawthorne 30 Ton
- Hill-Acme 60 Ton
Welders
- Lincoln 300 AMP Tig/Stick
- Miller 300 AMP Tig/Stick
- 2-Lincoln 250 AMP Mig
- 2-Hobart 450 AMP Mig
- M&W 300 AMP Mig
- 2-G.E. 300 AMP Stick
- Miller CP 300 - Aluminum Mig
- Miller 250 AMP Aluminum Mig
- Cobramatic Port, Aluminum Mig
- Lincoln DC600 Sub-Arc System
- Airco 300 AMP Mig
- Millermatic 250 Mig
- 10-Miller AC/DC 250 Stick
- 4-Lincoln 250 AMP DC Stick
- 2-Miller Syncro Wabe Heli-Arc
- 1-Lincoln 200 AMP DC Port
- 2-Miller 225 AMP Portable
- 3-Lincoln 225 AMP Portable
- 1-Thermodynamics Pak - 10
- 1-Thermodynamics STAK-PAK
- 1-Thermodynamics Pak 100 xl
- 2-Thermodynamics Arc 300 gtsw
Flame-Shape Cutters
- Victor Track Torches
- Heath Ultragraph 48" x 48"
- L-Tech Shape Cutter 48" x 96"
Shears
- Wysong 14 Gauge x 10'
- Niagara ½" x 6'
- Hercules ½" x 10'
Press Brakes
- Adira 30 Ton
- D&K 90 Ton
- D&K 225 Ton
Hand Brakes
- Wysong 14 Gauge x 10'
- Connecticut Pan 16 Gauge x 3'
- Wysong 16 Gauge x 8'
- Tennsmith 16 Gauge x 10'
Drills, Grinders, and Miscellaneou
Drills
- Wilton 16"
- Rockwell 16"
- Craftsman (2) 16"
- Powermatic (2) 20"
- 4 Station Gang Drill
- Caser 9" x 48" Radial Arm
- Soraluce 12" x 50" Radial Arm
- Cincinnati 12" x 60" Radial Arm
- G&L 13" x 84" Radial Arm
- Do-All Drill-Tap Machine (2)
Grinders
- Cincinnati Tool & Cutter Grinder
- Pilgrim Tool & Cutter Grinder
- Harig 6" x 12"
- K.O. Lee 6" x 18"
- Harig 6" x 18"
- Okamoto 16" x 32"
- Tool Post Grinders (5)
- Blanchard 42" O.D.
Key Seater
- Davis No. 5 (2)
- Morrison No.
Threaders
- Rigid 300¼" - 2½" (2)
- Oster 3/8" - 3"
Heat Treat
- Thermolyne 12" x 12" x 12"
- Johnson 12" x 12" x 17"
Sandblast
- Blastall Cabinet Type (2)
- Sullair with Compressor
EDM Machines
Hitachi H-Cut 203 CNC Wire EDM (1994)
- Table travels 12.6" x 9.8"
Censpark America 50 P Sinker EDM (1997)
- Table travels 11.8" x 7.9"
Lathes, Milling Machines, Presses
Lathes
- (2)-Clausing 13" x 36"
- Supermax 13" x 38"
- Howa 1500 13" x 54"
- (3)-LeBlond 18" x 54"
- (2)-LeBlond 19" x 78"
- Monarch 20" x 165"
- TUR 24" x 80"
- Lebonlond 18" x 96"
- Lodge & Shipley 20" x 54"
- LeBlond 24" x 150"
- Hankook 28" x 120"
- Swift 40' x 288'
- Mauser 42" x 276"
- J&L No.7 Turret
- J&L No.7B Turret
- J&L No.10A Turret
Vertical Milling Machines
- Excello 9" x 42"
- Supermax 9" x 42" with readout
- 5-Bridgeport 9" x 42" with readout
- 1-Bridgeport with 12" Riser
- Seiki XK 5" x 42" w/Pro
- 2-Lagun FTV-4 with readout
- 2-Cincinnati No.3
- 1-Cincinnati No.4
- 1-Cincinnati No.5
- 1-Cincinnati 315-16DT
- 1-K&T No.5
Horizontal Milling Machines
- Cincinnati No. 6 w/Vertical Head
- Cincinnati No.2
- Cincinnati No. 3
- Supermax Horiz/Vert
- Lagun Horiz/Vert
- Fexac Universal Mill
- OKK Horizontal/Vertical
Horizontal Boring Mill
- Kubaki -KBT 1003 w/Pro
- (2) Toshiba BT-8D 3" bar with read
- (3) Toshiba BT-10B 4" bar with read
- Toshiba BFT-13C 5" bar with read
Vertical Turret Lathe
- Bullard 36"
- Bullard 42" w/Pro
- Bullard 60"
Presses
- Dake No.0
- Dake No.1½
- Dake No.3
- 1-25 Ton Hydraulic
- 2-50 Ton Hydraulic
- 1-100 Ton Hydraulic
Machinery Moving & Rigging Equipment
Lift Trucks
- (2) Baker (electric) 4000lb. CAP
- (1) Clark (gas) 4000lb. CAP
- (1) Caterpillar (gas) 5000lb. CAP
- (1) Caterpillar (propane) 5000lb. CAP
- (3) Caterpillar (Electric) 5500 lb. CAP
- (1) Caterpillar (propane) 6000lb. CAP
- (3) Clark (gas) 6000lb. CAP
- (2) Yale (gas) 8000lb. CAP
- (1) Allis (Propane) 8000lb.
- (1) Clark (gas) 15,000lb. CAP
- (1) Caterpillar (diesel) 15,000lb. CAP
Trucks
- Ford 9000 Tractor / 35' Flat Bed Trailer
- Ford 9000 Rollback
- Chev C70 20' Roll Back
- GMC C6000 Dump Bed
- Chev C40 Dump Bed
- Chev C30 Dump Bed
- 5-Chev C30 Flat Beds
- 1-Chev C30 Service
- 3- Ford F350 Flat Bed
Cranes
- Ford 880 with 12 ton Pitman boom / 15'JIB
- Bullard 60"
- (2) 15 Ton Overhead Bridge - 88 ft. Span
Scissor Lifts
- 2-Grove 30'
- 1-MEC Manlift
